Skip to main content

Spline

class Spline extends Curve

A node for drawing a smooth line through a number of points.

This node uses Bézier curves for drawing each segment of the spline.

Examples

Constructors​

constructor​

public override new Splineprops: SplineProps: Spline

Parameters

Overwrites Curve.constructor

Properties​

absolutePosition​

readonly public absolutePosition: SimpleVector2SignalSpline

A helper signal for operating on the position in world space.

Retrieving the position using this signal returns the position in world space. Similarly, setting the position using this signal transforms the new value to local space.

If the new value is a function, the position of this node will be continuously updated to always match the position returned by the function. This can be useful to "pin" the node in a specific place or to make it follow another node's position.

Unlike position, this signal is not compound - it doesn't contain separate signals for the x and y components.

Inherited from Curve.absolutePosition

absoluteRotation​

readonly public absoluteRotation: SimpleSignalnumberSpline

A helper signal for operating on the rotation in world space.

Retrieving the rotation using this signal returns the rotation in world space. Similarly, setting the rotation using this signal transforms the new value to local space.

If the new value is a function, the rotation of this node will be continuously updated to always match the rotation returned by the function.

Inherited from Curve.absoluteRotation

absoluteScale​

readonly public absoluteScale: SimpleVector2SignalSpline

A helper signal for operating on the scale in world space.

Retrieving the scale using this signal returns the scale in world space. Similarly, setting the scale using this signal transforms the new value to local space.

If the new value is a function, the scale of this node will be continuously updated to always match the position returned by the function.

Unlike scale, this signal is not compound - it doesn't contain separate signals for the x and y components.

Inherited from Curve.absoluteScale

alignContent​

readonly public alignContent: SimpleSignalFlexContentSpline
Inherited from Curve.alignContent

alignItems​

readonly public alignItems: SimpleSignalFlexItemsSpline
Inherited from Curve.alignItems

alignSelf​

readonly public alignSelf: SimpleSignalFlexItemsSpline
Inherited from Curve.alignSelf

antialiased​

readonly public antialiased: SimpleSignalbooleanSpline
Inherited from Curve.antialiased

arrowSize​

readonly public arrowSize: SimpleSignalnumberSpline

Controls the size of the end and start arrows.

To make the arrows visible make sure to enable startArrow and/or endArrow.

Inherited from Curve.arrowSize

basis​

readonly public basis: SimpleSignalFlexBasisSpline
Inherited from Curve.basis

bottom​

readonly public bottom: SimpleVector2SignalSpline

The position of the bottom edge of this node.

When set, this shortcut property will modify the node's position so that the bottom edge ends up in the given place.

When retrieved, it will return the position of the bottom edge in the parent space.

Inherited from Curve.bottom

bottomLeft​

readonly public bottomLeft: SimpleVector2SignalSpline

The position of the bottom left corner of this node.

When set, this shortcut property will modify the node's position so that the bottom left corner ends up in the given place.

When retrieved, it will return the position of the bottom left corner in the parent space.

Inherited from Curve.bottomLeft

bottomRight​

readonly public bottomRight: SimpleVector2SignalSpline

The position of the bottom right corner of this node.

When set, this shortcut property will modify the node's position so that the bottom right corner ends up in the given place.

When retrieved, it will return the position of the bottom right corner in the parent space.

Inherited from Curve.bottomRight

cache​

readonly public cache: SimpleSignalbooleanSpline
Inherited from Curve.cache

cachePadding​

readonly public cachePadding: SpacingSignalSpline

Controls the padding of the cached canvas used by this node.

By default, the size of the cache is determined based on the bounding box of the node and its children. That includes effects such as stroke or shadow. This property can be used to expand the cache area further. Usually used to account for custom effects created by shaders.

Inherited from Curve.cachePadding

children​

readonly public children: SignalComponentChildrenNode[]SplineSignalContextComponentChildrenNode[]Spline
Inherited from Curve.children

clip​

readonly public clip: SimpleSignalbooleanSpline
Inherited from Curve.clip

closed​

readonly public closed: SimpleSignalbooleanSpline

Whether the curve should be closed.

Closed curves have their start and end points connected.

Inherited from Curve.closed

composite​

readonly public composite: SimpleSignalbooleanSpline
Inherited from Curve.composite

compositeOperation​

readonly public compositeOperation: SimpleSignalGlobalCompositeOperationSpline
Inherited from Curve.compositeOperation

creationStack​

readonly public creationStack?: string
Inherited from Curve.creationStack

direction​

readonly public direction: SimpleSignalFlexDirectionSpline
Inherited from Curve.direction

element​

public element: HTMLElement
Inherited from Curve.element

end​

readonly public end: SimpleSignalnumberSpline

A percentage from the start after which the curve should be clipped.

The portion of the curve that comes after the given percentage will be made invisible.

This property is usefully for animating the curve appearing on the screen. The value of 0 means the very start of the curve (accounting for the startOffset) while 1 means the very end (accounting for the endOffset).

Inherited from Curve.end

endArrow​

readonly public endArrow: SimpleSignalbooleanSpline

Whether to display an arrow at the end of the visible curve.

Use arrowSize to control the size of the arrow.

Inherited from Curve.endArrow

endOffset​

readonly public endOffset: SimpleSignalnumberSpline

The offset in pixels from the end of the curve.

This property lets you specify where along the defined curve the actual visible portion ends. For example, setting it to 20 will make the last 20 pixels of the curve invisible.

This property is useful for trimming the curve using a fixed distance. If you want to animate the curve appearing on the screen, use end instead.

Inherited from Curve.endOffset

fill​

readonly public fill: CanvasStyleSignalSpline
Inherited from Curve.fill

filters​

readonly public filters: FiltersSignalSpline
Inherited from Curve.filters

fontFamily​

readonly public fontFamily: SimpleSignalstringSpline
Inherited from Curve.fontFamily

fontSize​

readonly public fontSize: SimpleSignalnumberSpline
Inherited from Curve.fontSize

fontStyle​

readonly public fontStyle: SimpleSignalstringSpline
Inherited from Curve.fontStyle

fontWeight​

readonly public fontWeight: SimpleSignalnumberSpline
Inherited from Curve.fontWeight

gap​

readonly public gap: Vector2LengthSignalSpline
Inherited from Curve.gap

grow​

readonly public grow: SimpleSignalnumberSpline
Inherited from Curve.grow

isClass​

public isClass: boolean
Inherited from Curve.isClass

justifyContent​

readonly public justifyContent: SimpleSignalFlexContentSpline
Inherited from Curve.justifyContent

key​

readonly public key: string
Inherited from Curve.key

layout​

readonly public layout: SimpleSignalLayoutModeSpline
Inherited from Curve.layout

left​

readonly public left: SimpleVector2SignalSpline

The position of the left edge of this node.

When set, this shortcut property will modify the node's position so that the left edge ends up in the given place.

When retrieved, it will return the position of the left edge in the parent space.

Inherited from Curve.left

letterSpacing​

readonly public letterSpacing: SimpleSignalnumberSpline
Inherited from Curve.letterSpacing

lineCap​

readonly public lineCap: SimpleSignalCanvasLineCapSpline
Inherited from Curve.lineCap

lineDash​

readonly public lineDash: SimpleSignalnumber[]Spline
Inherited from Curve.lineDash

lineDashOffset​

readonly public lineDashOffset: SimpleSignalnumberSpline
Inherited from Curve.lineDashOffset

lineHeight​

readonly public lineHeight: SimpleSignalLengthSpline
Inherited from Curve.lineHeight

lineJoin​

readonly public lineJoin: SimpleSignalCanvasLineJoinSpline
Inherited from Curve.lineJoin

lineWidth​

readonly public lineWidth: SimpleSignalnumberSpline
Inherited from Curve.lineWidth

margin​

readonly public margin: SpacingSignalSpline
Inherited from Curve.margin

maxHeight​

readonly public maxHeight: SimpleSignalLengthLimitSpline
Inherited from Curve.maxHeight

maxWidth​

readonly public maxWidth: SimpleSignalLengthLimitSpline
Inherited from Curve.maxWidth

middle​

readonly public middle: SimpleVector2SignalSpline

The position of the center of this node.

When set, this shortcut property will modify the node's position so that the center ends up in the given place.

If the offset has not been changed, this will be the same as the position.

When retrieved, it will return the position of the center in the parent space.

Inherited from Curve.middle

minHeight​

readonly public minHeight: SimpleSignalLengthLimitSpline
Inherited from Curve.minHeight

minWidth​

readonly public minWidth: SimpleSignalLengthLimitSpline
Inherited from Curve.minWidth

offset​

readonly public offset: Vector2SignalSplineVector2SignalContextSpline

Represents the offset of this node's origin.

By default, the origin of a node is located at its center. The origin serves as the pivot point when rotating and scaling a node, but it doesn't affect the placement of its children.

The value is relative to the size of this node. A value of 1 means as far to the right/bottom as possible. Here are a few examples of offsets:

  • [-1, -1] - top left corner
  • [1, -1] - top right corner
  • [0, 1] - bottom edge
  • [-1, 1] - bottom left corner
Inherited from Curve.offset

opacity​

readonly public opacity: SimpleSignalnumberSpline

Represents the opacity of this node in the range 0-1.

The value is clamped to the range 0-1.

Inherited from Curve.opacity

padding​

readonly public padding: SpacingSignalSpline
Inherited from Curve.padding

parent​

readonly public parent: SimpleSignalnullNodevoid = ...
Inherited from Curve.parent

points​

readonly public points: SimpleSignalnullSignalValuePossibleVector2number[]Spline

The knots of the spline as an array of knots with auto-calculated handles.

You can control the smoothness of the resulting curve via the smoothness property.

position​

readonly public position: Vector2SignalSplineVector2SignalContextSpline

Represents the position of this node in local space of its parent.

Examples

Inherited from Curve.position

properties​

readonly public properties: RecordstringPropertyMetadataany = ...
Inherited from Curve.properties

ratio​

readonly public ratio: SimpleSignalnullnumberSpline
Inherited from Curve.ratio
readonly public right: SimpleVector2SignalSpline

The position of the right edge of this node.

When set, this shortcut property will modify the node's position so that the right edge ends up in the given place.

When retrieved, it will return the position of the right edge in the parent space.

Inherited from Curve.right

rotation​

readonly public rotation: SimpleSignalnumberSpline

Represents the rotation (in degrees) of this node relative to its parent.

Inherited from Curve.rotation

scale​

readonly public scale: Vector2SignalSplineVector2SignalContextSpline

Represents the scale of this node in local space of its parent.

Examples

Inherited from Curve.scale

shaders​

readonly public shaders: SignalPossibleShaderConfigShaderConfig[]SplineSignalContextPossibleShaderConfigShaderConfig[]Spline
Experimental
This is an experimental feature. The behavior and API may change drastically between minor releases.
Inherited from Curve.shaders

shadowBlur​

readonly public shadowBlur: SimpleSignalnumberSpline
Inherited from Curve.shadowBlur

shadowColor​

readonly public shadowColor: ColorSignalSpline
Inherited from Curve.shadowColor

shadowOffset​

readonly public shadowOffset: Vector2SignalSplineVector2SignalContextSpline
Inherited from Curve.shadowOffset

shrink​

readonly public shrink: SimpleSignalnumberSpline
Inherited from Curve.shrink

size​

readonly public size: Vector2LengthSignalSpline

Represents the size of this node.

A size is a two-dimensional vector, where x represents the width, and y represents the height.

The value of both x and y is of type Length which is either:

  • number - the desired length in pixels
  • ${number}% - a string with the desired length in percents, for example '50%'
  • null - an automatic length

When retrieving the size, all units are converted to pixels, using the current state of the layout. For example, retrieving the width set to '50%', while the parent has a width of 200px will result in the number 100 being returned.

When the node is not part of the layout, setting its size using percents refers to the size of the entire scene.

Examples

Inherited from Curve.size

skew​

readonly public skew: Vector2SignalSplineVector2SignalContextSpline

Represents the skew of this node in local space of its parent.

Examples

Inherited from Curve.skew

smoothness​

readonly public smoothness: SimpleSignalnumbervoid

The smoothness of the spline when using auto-calculated handles.

This property is only applied to knots that don't use explicit handles.

Default Value: 0.4

start​

readonly public start: SimpleSignalnumberSpline

A percentage from the start before which the curve should be clipped.

The portion of the curve that comes before the given percentage will be made invisible.

This property is usefully for animating the curve appearing on the screen. The value of 0 means the very start of the curve (accounting for the startOffset) while 1 means the very end (accounting for the endOffset).

Inherited from Curve.start

startArrow​

readonly public startArrow: SimpleSignalbooleanSpline

Whether to display an arrow at the start of the visible curve.

Use arrowSize to control the size of the arrow.

Inherited from Curve.startArrow

startOffset​

readonly public startOffset: SimpleSignalnumberSpline

The offset in pixels from the start of the curve.

This property lets you specify where along the defined curve the actual visible portion starts. For example, setting it to 20 will make the first 20 pixels of the curve invisible.

This property is useful for trimming the curve using a fixed distance. If you want to animate the curve appearing on the screen, use start instead.

Inherited from Curve.startOffset

stroke​

readonly public stroke: CanvasStyleSignalSpline
Inherited from Curve.stroke

strokeFirst​

readonly public strokeFirst: SimpleSignalbooleanSpline
Inherited from Curve.strokeFirst

styles​

public styles: CSSStyleDeclaration
Inherited from Curve.styles

textAlign​

readonly public textAlign: SimpleSignalCanvasTextAlignSpline
Inherited from Curve.textAlign

textDirection​

readonly public textDirection: SimpleSignalCanvasDirectionSpline
Inherited from Curve.textDirection

textWrap​

readonly public textWrap: SimpleSignalTextWrapSpline
Inherited from Curve.textWrap

top​

readonly public top: SimpleVector2SignalSpline

The position of the top edge of this node.

When set, this shortcut property will modify the node's position so that the top edge ends up in the given place.

When retrieved, it will return the position of the top edge in the parent space.

Inherited from Curve.top

topLeft​

readonly public topLeft: SimpleVector2SignalSpline

The position of the top left corner of this node.

When set, this shortcut property will modify the node's position so that the top left corner ends up in the given place.

When retrieved, it will return the position of the top left corner in the parent space.

Inherited from Curve.topLeft

topRight​

readonly public topRight: SimpleVector2SignalSpline

The position of the top right corner of this node.

When set, this shortcut property will modify the node's position so that the top right corner ends up in the given place.

When retrieved, it will return the position of the top right corner in the parent space.

Inherited from Curve.topRight

wrap​

readonly public wrap: SimpleSignalFlexWrapSpline
Inherited from Curve.wrap

zIndex​

readonly public zIndex: SimpleSignalnumberSpline
Inherited from Curve.zIndex

Accessors​

columnGap​

public get columnGap(): SignalLengthnumberthisSignalContextLengthnumberthis
Inherited from Curve.columnGap

height​

public get height(): SignalLengthnumberthisSignalContextLengthnumberthis
Inherited from Curve.height

rowGap​

public get rowGap(): SignalLengthnumberthisSignalContextLengthnumberthis
Inherited from Curve.rowGap

width​

public get width(): SignalLengthnumberthisSignalContextLengthnumberthis
Inherited from Curve.width

x​

public get x(): SimpleSignalnumberthis
Inherited from Curve.x

y​

public get y(): SimpleSignalnumberthis
Inherited from Curve.y

Methods​

[iterator]​

public [iterator](): Generatorkey: stringmeta: PropertyMetadataanysignal: SimpleSignalanyvoidvoidunknown
Inherited from Curve.[iterator]

absoluteOpacity​

public absoluteOpacity(): number
Inherited from Curve.absoluteOpacity

add​

public addnode: ComponentChildren: Spline

Add the given node(s) as the children of this node.

The nodes will be appended at the end of the children list.

Examples

Parameters

Inherited from Curve.add

anchorPosition​

public anchorPosition(): Vector2
Inherited from Curve.anchorPosition

applyState​

public applyStatestate: NodeState: void
public applyStatestate: NodeStateduration: numbertiming?: TimingFunction: ThreadGenerator

Apply the given state to the node, setting all matching signal values to the provided values.

Parameters

Inherited from Curve.applyState

arcLength​

public arcLength(): number

The visible arc length of this curve.

This arc length accounts for both the offset and the start and end properties.

Inherited from Curve.arcLength

baseArcLength​

public baseArcLength(): number

The base arc length of this curve.

This is the entire length of this curve, not accounting for the offsets.

Inherited from Curve.baseArcLength

cacheBBox​

public cacheBBox(): BBox

Get a bounding box for the contents rendered by this node as well as its children.

Inherited from Curve.cacheBBox

cardinalPoint​

public cardinalPointorigin: OriginDirection: SimpleVector2SignalSpline

Get the cardinal point corresponding to the given origin.

Parameters

Inherited from Curve.cardinalPoint

childAs​

public childAsT extends NodeT = Nodeindex: number: nullT

Get the nth children cast to the specified type.

Type Parameters

Parameters

  • index: number

    The index of the child to retrieve.

Inherited from Curve.childAs

childrenAs​

public childrenAsT extends NodeT = Node(): T[]

Get the children array cast to the specified type.

Type Parameters

Inherited from Curve.childrenAs

clone​

public clonecustomProps: NodeState = {}: Spline

Create a copy of this node.

Parameters

Inherited from Curve.clone

completion​

public completion(): number

The percentage of the curve that's currently visible.

The returned value is the ratio between the visible length (as defined by start and end) and the offset length of the curve.

Inherited from Curve.completion

compositeToLocal​

public compositeToLocal(): DOMMatrix
Inherited from Curve.compositeToLocal

compositeToWorld​

public compositeToWorld(): DOMMatrix

A matrix mapping composite space to world space.

Certain effects such as blur and shadows ignore the current transformation. This matrix can be used to transform their parameters so that the effect appears relative to the closest composite root.

Inherited from Curve.compositeToWorld

computedPosition​

public computedPosition(): Vector2
Inherited from Curve.computedPosition

dispose​

public dispose(): void

Prepare this node to be disposed of.

This method is called automatically when a scene is refreshed. It will be called even if the node is not currently attached to the tree.

The goal of this method is to clean any external references to allow the node to be garbage collected.

Inherited from Curve.dispose

distanceToPercentage​

public distanceToPercentagevalue: number: number

Convert a distance along the curve to a percentage.

The distance should be given in relation to the full curve, not accounting for startOffset and endOffset.

Parameters

  • value: number

    The distance along the curve.

Inherited from Curve.distanceToPercentage

drawOverlay​

public override drawOverlaycontext: CanvasRenderingContext2Dmatrix: DOMMatrix: void

Draw an overlay for this node.

The overlay for the currently inspected node is displayed on top of the canvas.

The provided context is in screen space. The local-to-screen matrix can be used to transform all shapes that need to be displayed. This approach allows to keep the line widths and gizmo sizes consistent, no matter how zoomed-in the view is.

Parameters

Overwrites Curve.drawOverlay

findAll​

public findAllT extends NodeTpredicate: node: any => node is T: T[]
public findAllT extends NodeT = Nodepredicate: node: any => boolean: T[]

Find all descendants of this node that match the given predicate.

Type Parameters

Parameters

  • predicate: node: any => node is T

    A function that returns true if the node matches.

Inherited from Curve.findAll

findAncestor​

public findAncestorT extends NodeTpredicate: node: Node => node is T: nullT
public findAncestorT extends NodeT = Nodepredicate: node: Node => boolean: nullT

Find the closest ancestor of this node that matches the given predicate.

Type Parameters

Parameters

Inherited from Curve.findAncestor

findFirst​

public findFirstT extends NodeTpredicate: node: Node => node is T: nullT
public findFirstT extends NodeT = Nodepredicate: node: Node => boolean: nullT

Find the first descendant of this node that matches the given predicate.

Type Parameters

Parameters

Inherited from Curve.findFirst

findLast​

public findLastT extends NodeTpredicate: node: Node => node is T: nullT
public findLastT extends NodeT = Nodepredicate: node: Node => boolean: nullT

Find the last descendant of this node that matches the given predicate.

Type Parameters

Parameters

Inherited from Curve.findLast

getOriginDelta​

public getOriginDeltaorigin: Origin: Vector2

Parameters

Inherited from Curve.getOriginDelta

getPointAtPercentage​

public getPointAtPercentagevalue: number: CurvePoint

Parameters

Inherited from Curve.getPointAtPercentage

getState​

public getState(): NodeState

Return a snapshot of the node's current signal values.

This method will calculate the values of any reactive properties of the node at the time the method is called.

Inherited from Curve.getState

hit​

public hitposition: Vector2: nullNode

Try to find a node intersecting the given position.

Parameters

Inherited from Curve.hit

insert​

public insertnode: ComponentChildrenindex: number = 0: Spline

Insert the given node(s) at the specified index in the children list.

Examples

Parameters

Inherited from Curve.insert

instantiate​

public instantiateprops: NodeProps = {}: Spline

Create an instance of this node's class.

Parameters

Inherited from Curve.instantiate

isLayoutRoot​

public isLayoutRoot(): boolean
Inherited from Curve.isLayoutRoot

knots​

public knots(): KnotInfo[]

layoutEnabled​

public layoutEnabled(): boolean

Get the resolved layout mode of this node.

When the mode is null, its value will be inherited from the parent.

Use layout to get the raw mode set for this node (without inheritance).

Inherited from Curve.layoutEnabled

localToParent​

public localToParent(): DOMMatrix

Get the local-to-parent matrix for this node.

This matrix transforms vectors from local space of this node to local space of this node's parent.

Inherited from Curve.localToParent

localToWorld​

public localToWorld(): DOMMatrix

Get the local-to-world matrix for this node.

This matrix transforms vectors from local space of this node to world space.

Examples

Inherited from Curve.localToWorld

lockSize​

public lockSize(): void
Inherited from Curve.lockSize

move​

public moveby: number = 1: Spline

Rearrange this node in relation to its siblings.

Children are rendered starting from the beginning of the children list. We can change the rendering order by rearranging said list.

A positive by arguments move the node up (it will be rendered on top of the elements it has passed). Negative values move it down.

Parameters

  • by: number = 1

    Number of places by which the node should be moved.

Inherited from Curve.move

moveAbove​

public moveAbovenode: NodedirectlyAbove: boolean = false: Spline

Move the node above the provided node in the parent's layout.

The node will be moved above the provided node and from then on will be rendered on top of it. By default, if the node is already positioned higher than the sibling node, it will not get moved.

Parameters

  • node: Node

    The sibling node below which to move.

  • directlyAbove: boolean = false

    Whether the node should be positioned directly above the sibling. When true, will move the node even if it is already positioned above the sibling.

Inherited from Curve.moveAbove

moveBelow​

public moveBelownode: NodedirectlyBelow: boolean = false: Spline

Move the node below the provided node in the parent's layout.

The node will be moved below the provided node and from then on will be rendered below it. By default, if the node is already positioned lower than the sibling node, it will not get moved.

Parameters

  • node: Node

    The sibling node below which to move.

  • directlyBelow: boolean = false

    Whether the node should be positioned directly below the sibling. When true, will move the node even if it is already positioned below the sibling.

Inherited from Curve.moveBelow

moveDown​

public moveDown(): Spline

Move the node down in relation to its siblings.

The node will exchange places with the sibling right below it (if any) and from then on will be rendered under it.

Inherited from Curve.moveDown

moveOffset​

public moveOffsetoffset: Vector2: void

Update the offset of this node and adjust the position to keep it in the same place.

Parameters

Inherited from Curve.moveOffset

moveTo​

public moveToindex: number: Spline

Move the node to the provided position relative to its siblings.

If the node is getting moved to a lower position, it will be placed below the sibling that's currently at the provided index (if any). If the node is getting moved to a higher position, it will be placed above the sibling that's currently at the provided index (if any).

Parameters

  • index: number

    The index to move the node to.

Inherited from Curve.moveTo

moveToBottom​

public moveToBottom(): Spline

Move the node to the bottom in relation to its siblings.

The node will be placed at the beginning of the children list and from then on will be rendered below all of its siblings.

Inherited from Curve.moveToBottom

moveToTop​

public moveToTop(): Spline

Move the node to the top in relation to its siblings.

The node will be placed at the end of the children list and from then on will be rendered on top of all of its siblings.

Inherited from Curve.moveToTop

moveUp​

public moveUp(): Spline

Move the node up in relation to its siblings.

The node will exchange places with the sibling right above it (if any) and from then on will be rendered on top of it.

Inherited from Curve.moveUp

offsetArcLength​

public offsetArcLength(): number

The offset arc length of this curve.

This is the length of the curve that accounts for the offsets.

Inherited from Curve.offsetArcLength

parentAs​

public parentAsT extends NodeT = Node(): nullT

Get the parent cast to the specified type.

Type Parameters

Inherited from Curve.parentAs

parentToWorld​

public parentToWorld(): DOMMatrix

Get the parent-to-world matrix for this node.

This matrix transforms vectors from local space of this node's parent to world space.

Inherited from Curve.parentToWorld

peekChildren​

public peekChildren(): readonly Node[]

Get the current children of this node.

Unlike children, this method does not have any side effects. It does not register the children signal as a dependency, and it does not spawn any children. It can be used to safely retrieve the current state of the scene graph for debugging purposes.

Inherited from Curve.peekChildren

percentageToDistance​

public percentageToDistancevalue: number: number

Convert a percentage along the curve to a distance.

The returned distance is given in relation to the full curve, not accounting for startOffset and endOffset.

Parameters

  • value: number

    The percentage along the curve.

Inherited from Curve.percentageToDistance

profile​

public override profile(): CurveProfile
Overwrites Curve.profile

reactiveClone​

public reactiveClonecustomProps: NodeState = {}: Spline

Create a reactive copy of this node.

A reactive copy has all its properties dynamically updated to match the source node.

Parameters

Inherited from Curve.reactiveClone

releaseSize​

public releaseSize(): void
Inherited from Curve.releaseSize

remove​

public remove(): Spline

Remove this node from the tree.

Inherited from Curve.remove

removeChildren​

public removeChildren(): Spline

Remove all children of this node.

Inherited from Curve.removeChildren

render​

public rendercontext: CanvasRenderingContext2D: void

Render this node onto the given canvas.

Parameters

Inherited from Curve.render

reparent​

public reparentnewParent: Node: Spline

Change the parent of this node while keeping the absolute transform.

After performing this operation, the node will stay in the same place visually, but its parent will be changed.

Parameters

Inherited from Curve.reparent

restore​

public restore(): void
public restoreduration: numbertiming?: TimingFunction: ThreadGenerator

Restore the node to its last saved state.

This method can be used together with the save method to restore a node to a previously saved state. Restoring a node to a previous state removes that state from the state stack.

Examples

Inherited from Curve.restore

ripple​

public rippleduration: number = 1: GeneratorvoidThreadGeneratorPromiseanyPromisableanyvoidany

Parameters

Inherited from Curve.ripple

save​

public save(): void

Push a snapshot of the node's current state onto the node's state stack.

This method can be used together with the restore method to save a node's current state and later restore it. It is possible to store more than one state by calling save method multiple times.

Inherited from Curve.save

snapshotClone​

public snapshotClonecustomProps: NodeState = {}: Spline

Create a copy of this node.

Unlike clone, a snapshot clone calculates any reactive properties at the moment of cloning and passes the raw values to the copy.

Parameters

Inherited from Curve.snapshotClone

toPromise​

public toPromise(): PromiseSpline

Wait for any asynchronous resources that this node or its children have.

Certain resources like images are always loaded asynchronously. Awaiting this method makes sure that all such resources are done loading before continuing the animation.

Inherited from Curve.toPromise

view​

public view(): View2D
Inherited from Curve.view

worldToLocal​

public worldToLocal(): DOMMatrix

Get the world-to-local matrix for this node.

This matrix transforms vectors from world space to local space of this node.

Examples

Inherited from Curve.worldToLocal

worldToParent​

public worldToParent(): DOMMatrix

Get the world-to-parent matrix for this node.

This matrix transforms vectors from world space to local space of this node's parent.

Inherited from Curve.worldToParent